Cable Tray Width Sizing Calculator

Range: 1–10,000

The model assumes all cables have the same outside diameter and occupy one flat row.

Range: 0.1–500 mm

Use the actual outside diameter of the installed cable or cable assembly, in millimetres.

Range: 0–10

For example, 0.25 leaves a gap equal to one quarter of the cable outside diameter.

Range: 1–1,000 mm

Use usable internal depth, not the tray side-rail height or nominal catalogue depth.

Range: 0.1–100 %

Enter the project fill assumption used for this geometric estimate; this is not a tray-standard limit.

Range: 0–100 %

Enter the project allowance for future routing or installation tolerance.

Range: 1–10,000 mm

Use the usable internal width of the selected tray, not its nominal outside width.